Date:

  • July 18 – August 06, 2022 (21 Days)

Participants addressed:

  • Graduates in engineering and natural science as well as practitioners in the engineering, material science and even computation field

Overview

Engineering structures are exposed to degradation once being in operation. This poses a challenge, would it be in design or even during in service of those structures. To take an optimum advantage of those structures’ light weight design and/or operational life, application of the damage tolerance design principle becomes unavoidable. 

Damage tolerance in design is based on the principle, that damage – or any kind of degradation – is allowed to exist in a structure, provided it will not lead to any critical situation and hence safety concern. Damage tolerance can be achieved when loading conditions as well as the locations of degradation of the respective engineering structures are known. In that case inspections mainly based on non-destructive testing (NDT) have to be performed at intervals, such that the degree of degradation can be identified before the level of tolerable damage is achieved and a repair of the structure can be made in time. 

Along the DaTES Summer School to be performed, participants will be introduced into the damage tolerance design principle including the techniques this principle is based upon. This includes the way on how to measure and analyze loads, numerically simulate structures in terms of stresses, strains, fatigue life and NDT, perform inspection and testing, and possibly configure systems to perform an engineering structure’s health monitoring. 

Topics:

  • Introduction to Damage Tolerance
  • Structural Mechanics
  • Force, Equilibrium, Stress & Strain
  • Notches & Fatigue
  • Service Load Spectra
  • Fatigue Life Evaluation – Simulation & Experiment
  • Fracture Mechanics
  • Introduction into NDT & Mechanical Vibrations
  • Ultrasonic Based NDT
  • Electromagnetics Based NDT
  • Thermography Based NDT
  • Damage Tolerance Principles
  • Structural Health Monitoring

The DaTES Summer School will be run jointly between Dresden International University (DIU) and IMA Materialforschung und Anwendungstechnik GmbH (IMA). Both organizations are internationally well-known and are based in Dresden/Germany. DIU as an an-institute of Dresden University of Technology offers degree courses in various disciplines including NDT. IMA is an internationally most renown organization for testing, monitoring and certification for the entire supplier’s industry.  

Each day of the DaTES Summer School a DIU lecturer will present the theory and an IMA representative will present a practical application of the topics addressed above. The summer school will take place next or within the premises of IMA, such that participants will have a chance to take part in real world testing being performed at full scale. Participants will have to pass an assessment at the end to obtain a certificate, that can also be credited to degree courses along the same track offered by DIU and IMA. 

Participants will also have the option to visit famous places closer by on the weekends, starting from Dresden and moving onto Berlin, Saxon Switzerland, and/or Prague. 

Summerschool Timetable

Day 1: Welcome Event

Introduction to Programmes (NDT, IMM)
German Basics

Guided Tour Dresden

Day 2: Introduction to Damage Tolerance

Introduction to Damage Tolerance - A Motivation

Visit to IMA

Day 3: Structural Mechanics

Structural Mechanics - Force, Equilibrium, Stress & Strain

Force Measurement & Stress-Strain Determination

Day 4: Structural Mechanics

Structural Mechanics - Notches & Fatigue Determination of Notch Behavior & Fatigue Data

Day 5: Service Load Spectra

Service Load Spectra

Load Spectrum Determination

Day 6/7 - Freetime oder Trip to Berlin on Saturday

Sa: Freetime oder Trip to berlin

So: Freetime

Day 8: Fatigue Life Evaluation

Simulation and Experiment of Service Loaded Component under Fatigue

Field Trip to Company (Global Foundries)

Day 9: Fracture Mechanics

Fracture Mechanics

Crack Propagation Experiment

Day 10: Introduction to NDT & Mechanical Vibration

Introduction to NDT & Mechanical Vibration

Vibration Test (Modal Analysis)

Field Trip to Volkswagen (Gläserne Manufaktur)

Day 11: Ultrasonics

Ultrasonics

Ultrasonic Inspection

Day 12: Electromagnetics

Electromagnetics

Eddy Current Inspection

Day 13/14: Freetime oder Trip to Prague

Freetime oder Daytrip To Prague an Saturday

Day 15: Thermography

Thermography

Thermographic Inspection

Day 16: Damage Tolerance Principles

Damage Tolerance Principles

Damage Tolerance Assessment

Day 17: Structural Health Monitoring

Structural Health Monitoring

SHM Test

Day 18: Final Assessment

Final Assessment

Individual Presentations: My Damage Tolerance Case

Day 19: Visit to the Physical-Mathematical Salon and Traffic Museum

Visit to the Physical-Mathematical Salon

Visit to the Traffic Museum

Day 20: Visit to Saxonian Switzerland & Farewell Party

Visit to Saxonian Switzerland & Farewell Party

Day 21: Freetime (Departure)

Freetime (Departure)

Our experts

Prof. Dr. Christian Boller

Chair of Non-destruitve testing and Quality assurance LZfPQ) University of Saardland, Campus Dudweiler

Prof. Dr.-Ing. Thomas Fleischer

Managing Director of IMA GmbH Dresden, Professor at Brandenburg University of Technology, Lecture /Seminars at Dresden University Technology

Personal Advice

Compact

Degree:
DIU Certificate  
Duration:
3 Weeks
Program Type:
Course
 
Next start:
July 18 – August 06, 2022 
Fees:
1.400 €* (flight/visa/food/accomodation have to be paid extra)
*Umsatzsteuerfrei nach § 4 Nr. 21 a) bb) UStG
 

Download information material